1990’s RK4 Sea Truck

A gray and black metal RK4 Sea Truck labeled "SOLUTION" sits on a trailer inside a large indoor garage with shelves, orange objects, and RK4 equipment in the background.
An RK4 Sea Truck workboat in black and silver rests on a trailer inside a workshop, surrounded by shelves and equipment. The bow is flat and square, with the cabin partially visible.
An RK4 Sea Truck cabin is being built in a workshop, featuring exposed front framework and an unfinished interior while the ceiling and industrial equipment can be seen in the background.
A black and gray RK4 Sea Truck utility boat labeled "Solution" is parked on a trailer inside a warehouse, with shelves and equipment visible in the background.
Close-up of the RK4 Sea Truck’s underside as it rests indoors on a trailer, supported by wooden blocks and metal framework. The blurred background draws attention to the hull of the RK4 Sea Truck.
An RK4 Sea Truck with a cabin and large windows, powered by a Yamaha four-stroke outboard motor, is parked inside a garage or workshop with a wooden ceiling.
Two "Four Stroke" outboard motors are mounted on the RK4 Sea Truck, which has a visible metal hull and trailer. The setup is positioned above a concrete or garage floor.
Close-up of a metal component with a visible bolt and "Yamaha Motor Co., Ltd." label, including a reference number, likely from the RK4 Sea Truck. The background is blurred.
Close-up of a Yamaha outboard motor on an RK4 Sea Truck, showing a round opening and a label reading "YAMAHA F150X, 63P, 11097213, Made in Japan." The metallic casing appears slightly worn.
A close-up of a gray engine labeled "150 four stroke fuel injection" on the back of a metal RK4 Sea Truck. A round logo sticker and the RK4 marking appear near the bottom.
Category:

$59,888.00

Inquire Now

1990’s RK4 Sea Truck – Description

Fibreglass boat with a steel exoskeleton custom handcrafted motorized barge. This utility landing craft serves many functions, meets & exceeds the criteria requirements for a work boat, supply boat, or fishing boat. Construction throughout this private barge is to a high commercial standard with particular emphasis on its ability to carry heavy duty loads such as 4 ATV Quads at once. Foam filled fiberglass with aluminum sponzit, loading ramp made easy for simple beachings to offload gear, supplies or freight to isolated Gulf Islands. Outdated electronics have been removed, for ease of installation of the buyers preferred choice of navigation electronics. Fresh zinc anodes and recent bottom coat of paint to compliment preparation for its next owner. Dual axel “Tuff” trailer, hydraulic over electric brakes, 12,000 lb rating, included.

Dimensions:

    • LOA: 26 ft 0 in
    • Beam: 9ft 0 in
    • Maximum Draft: 12 in

Engine x 2

  • 150 HP Each
  • Yamaha 4 Stroke
  • Engine Type: Outboard
  • PORT 60 Hours / STBD 61 Hours (Both after rebuild)
  • Engine/Fuel Type: Gas/Petrol
  • Location: Stern

Tanks

  • Fuel Tank: 300 Litres / 80 Gallons

Electrical System

  • Dual starting battery

Deck & Hull Equipment

  • Aluminum decks on the exterior.
  • Self draining scuppers / clam shells
  • Landing craft max cargo weight 8000 lbs

Mechanical Equipment

  • Self Draining

 

 

 

 

Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Additional Details